Concrete Patio Cost in Maryland
2026 estimates — plain, stamped, stained, and exposed aggregate
300 sqft plain concrete patio, Maryland labor rates. Updated June 2026.
Calculate Your Maryland Concrete Patio Cost
Concrete Patio Cost by Finish — Maryland 2026 (300 sqft)
| Finish Type | 300 sqft (MD) | Per sqft |
|---|---|---|
| Plain / Broom-finish | $2,655 | $8.85/sqft |
| Colored concrete | $3,717 | $12.39/sqft |
| Acid-stained | $3,363 | $11.21/sqft |
| Exposed aggregate | $4,071 | $13.57/sqft |
| Stamped concrete | $5,841 | $19.47/sqft |
Concrete Patios in Maryland — Key Facts
1. Maryland Pricing
Concrete patio installation in Maryland is above the national average. Plain concrete ($$8.85/sqft) to stamped ($$19.47/sqft). Stamped concrete mimics pavers at 30–50% lower cost.
2. Maryland Climate Considerations
Seal your Maryland concrete patio every 2–3 years to prevent cracking and staining. In Maryland's climate, ensure proper drainage away from your foundation (minimum 1/8 inch slope per foot). Get 3 quotes — concrete patio pricing varies 25–40% between contractors.
3. Concrete vs. Pavers vs. Wood Deck
Concrete ($$9–$19/sqft) is the most affordable for ground-level patios in Maryland and lasts 25–50 years. Pavers cost 60–80% more but allow easy individual tile replacement. Wood decks make more sense for elevated installations on sloped yards.
FAQs — Concrete Patio Cost in Maryland
Concrete patio installation in Maryland costs $3,304 on average for a 300 sqft plain concrete patio — above the national average. Stamped concrete runs $5,841 for 300 sqft; plain broom-finish runs $2,655.
Stamped concrete costs $5,841 vs $2,655 for plain concrete for 300 sqft in Maryland. The premium delivers a decorative appearance similar to stone or brick pavers at 30–50% less cost. Stamped concrete requires resealing every 2–3 years to maintain appearance.
A properly installed and sealed concrete patio lasts 25–50 years in Maryland. Key factors: proper base preparation (4–6 inches compacted gravel), reinforcement (rebar or fiber mesh), correct drainage slope, and sealing every 2–3 years. In freeze-thaw climates, use air-entrained concrete and avoid deicing salts.
Concrete costs $2,655–$5,841 for 300 sqft in Maryland; pavers cost $6,372–$10,620. Pavers allow individual replacement if cracked, drain naturally, and maintain good value. Concrete is lower upfront cost but can crack (especially in freeze-thaw climates) and cracks are visible. Stamped concrete bridges the gap aesthetically at mid-range cost.
Most Maryland jurisdictions do not require permits for ground-level patios under 200 sqft that are not attached to the house structure. However, permits are typically needed for: patios larger than 200–300 sqft, raised patios or those attached to the home, covered patios/pergolas, and patios in HOA communities. Check with your local building department — permit costs average $50–$150 for patios.
Get Free Concrete Patio Quotes in Maryland
Compare 3+ licensed concrete contractors. Most homeowners save 20–30% by getting multiple bids.
Get Free Quotes on AngiMaryland Patio Summary
- →Plain avg: $2,655 / 300 sqft
- →Stamped: $5,841 / 300 sqft
- →Range: $2,478 – $4,626
- →Cost index: above national avg