Concrete Patio Cost in Texas
2026 estimates — plain, stamped, stained, and exposed aggregate
300 sqft plain concrete patio, Texas labor rates. Updated June 2026.
Calculate Your Texas Concrete Patio Cost
Concrete Patio Cost by Finish — Texas 2026 (300 sqft)
| Finish Type | 300 sqft (TX) | Per sqft |
|---|---|---|
| Plain / Broom-finish | $2,205 | $7.35/sqft |
| Colored concrete | $3,087 | $10.29/sqft |
| Acid-stained | $2,793 | $9.31/sqft |
| Exposed aggregate | $3,381 | $11.27/sqft |
| Stamped concrete | $4,851 | $16.17/sqft |
Concrete Patios in Texas — Key Facts
1. Texas Pricing
Concrete patio installation in Texas is near the national average. Plain concrete ($$7.35/sqft) to stamped ($$16.17/sqft). Stamped concrete mimics pavers at 30–50% lower cost.
2. Texas Climate Considerations
Texas concrete patios are a year-round investment — outdoor living is a major part of Texas home culture. Pour concrete in early morning in Texas summers to prevent premature curing from extreme heat (100°F+). Use control joints every 8–10 feet maximum in Texas's hot climate. Dark-colored concrete (charcoal stamping) gets extremely hot in Texas — consider lighter integral colors or shaded designs.
3. Concrete vs. Pavers vs. Wood Deck
Concrete ($$7–$16/sqft) is the most affordable for ground-level patios in Texas and lasts 25–50 years. Pavers cost 60–80% more but allow easy individual tile replacement. Wood decks make more sense for elevated installations on sloped yards.
FAQs — Concrete Patio Cost in Texas
Concrete patio installation in Texas costs $2,744 on average for a 300 sqft plain patio — near the national average. Stamped concrete runs $4,851 for 300 sqft; plain broom-finish runs $2,205. Texas's warm climate and outdoor living culture make concrete patios an excellent ROI investment.
Stamped concrete costs $4,851 vs $2,205 for plain concrete for 300 sqft in Texas. The premium delivers a decorative appearance similar to stone or brick pavers at 30–50% less cost. Stamped concrete requires resealing every 2–3 years to maintain appearance.
A properly installed and sealed concrete patio lasts 25–50 years in Texas. Key factors: proper base preparation (4–6 inches compacted gravel), reinforcement (rebar or fiber mesh), correct drainage slope, and sealing every 2–3 years. In freeze-thaw climates, use air-entrained concrete and avoid deicing salts.
Concrete costs $2,205–$4,851 for 300 sqft in Texas; pavers cost $5,292–$8,820. Pavers allow individual replacement if cracked, drain naturally, and maintain good value. Concrete is lower upfront cost but can crack (especially in freeze-thaw climates) and cracks are visible. Stamped concrete bridges the gap aesthetically at mid-range cost.
Most Texas jurisdictions do not require permits for ground-level patios under 200 sqft that are not attached to the house structure. However, permits are typically needed for: patios larger than 200–300 sqft, raised patios or those attached to the home, covered patios/pergolas, and patios in HOA communities. Check with your local building department — permit costs average $50–$150 for patios.
Get Free Concrete Patio Quotes in Texas
Compare 3+ licensed concrete contractors. Most homeowners save 20–30% by getting multiple bids.
Get Free Quotes on AngiTexas Patio Summary
- →Plain avg: $2,205 / 300 sqft
- →Stamped: $4,851 / 300 sqft
- →Range: $2,058 – $3,842
- →Cost index: near national avg