Window Replacement Cost in Washington
2026 estimates — per window installed, including labor and disposal
Standard double-hung vinyl, double-pane Low-E, includes labor & disposal. Updated June 2026.
Calculate Your Washington Window Cost
Window Cost by Frame Type — Washington 2026
| Frame Material | Avg (WA) | Range |
|---|---|---|
| Vinyl (most popular) | $805/win | $604 – $1,087 |
| Fiberglass | $1,171/win | $878 – $1,581 |
| Wood | $1,476/win | $1,107 – $1,993 |
| Composite | $1,110/win | $833 – $1,499 |
Per window with double-pane Low-E glass. Includes labor and disposal. Washington rates applied.
Window Glass Spec Guide — Washington
U-factor = insulation (lower is better). SHGC = solar heat gain (lower blocks more sun). Best for Washington: Double pane Low-E (U-factor ≤ 0.27, SHGC matched to your climate)
| Glass Type | U-Factor | SHGC | Cost (WA) |
|---|---|---|---|
| Single pane (existing) | 1.20 | 0.86 | baseline |
| Double pane clear | 0.45 | 0.70 | $488/win |
| Double pane Low-ERecommended | 0.27 | 0.30 | $708/win |
| Triple pane Low-E | 0.18 | 0.22 | $1,037/win |
Glass upgrade pricing is per vinyl frame window, installed. U-factor and SHGC targets from IECC 2021 / Energy Star requirements.
Window Replacement in Washington — What to Know
1. Climate Considerations for Washington
Washington state has strict energy codes requiring U-factor ≤ 0.28 in most climate zones. The wet Pacific Northwest climate makes moisture resistance critical — vinyl and fiberglass frames outperform wood. Seattle's mild winters mean double-pane Low-E is usually sufficient.
2. Top Tip for Washington Homeowners
In Washington's wet climate, proper installation with moisture-barrier flashing is critical to prevent the water infiltration common in older Pacific Northwest homes. Fiberglass frames offer superior dimensional stability in high-humidity conditions.
3. Federal Tax Credit
Energy Star certified windows qualify for a federal tax credit of up to $600/year (IRA, through 2032). Windows must meet U-factor and SHGC requirements for Washington's climate zone. Credit applies to materials only — not installation. Check energystar.gov for qualifying products in your climate zone.
FAQs — Window Replacement in Washington
Window replacement in Washington averages $915 per window in 2026. Seattle area labor costs are above national average. Washington's energy code requires U-factor ≤ 0.28 for most zones. Proper flashing and installation quality matters more than frame material in the wet climate.
Washington state has strict energy codes requiring U-factor ≤ 0.28 in most climate zones. The wet Pacific Northwest climate makes moisture resistance critical — vinyl and fiberglass frames outperform wood. Seattle's mild winters mean double-pane Low-E is usually sufficient.
Energy Star certified windows qualify for a federal tax credit of up to $600 per year (IRA, through 2032). Windows must meet U-factor and SHGC requirements for Washington's climate zone. The credit applies to materials only, not installation costs. See energystar.gov for qualifying products.
A typical single-family home in Washington has 12–20 windows. At $915 per window average, a full-house replacement runs $12,810–$18,300. Many homeowners replace in phases — prioritize south/west-facing windows (highest solar gain) and any showing visible failures (fogged glass, broken seals, drafts). Full-house quotes often save 15–25% per window vs. replacing one at a time.
In Washington, the best seasons are spring (March–May) and fall (September–November). Avoid peak summer heat, which reduces caulking and foam insulation effectiveness. Off-season scheduling typically saves 10–15% on labor due to better contractor availability. Order windows 3–4 weeks ahead as lead times vary by manufacturer.
Get 3 Free Window Quotes in Washington
Most homeowners save $500–$2,000 by comparing 3 window contractor quotes. Free, no obligation.
Washington Quick Stats
- →Avg/window: $915 (above national)
- →Range: $686 – $1,235
- →12-window home: ~$9,882 (bulk discount)
- →Tax credit: up to $600 (Energy Star, IRA)